Last updated: 16 Nov 2026 | 8 Views |
In a food plant, one invisible contamination point can put an entire batch, and a multimillion-baht contract, at risk.
(An illustrative story based on situations we commonly see in the field)
Wipa is the quality assurance manager at a chilled ready-to-eat food factory in Samut Sakhon. The plant employs more than 120 people and supplies customers in Thailand and overseas.
One morning she received the monthly environmental swab results from the laboratory. Listeria had been found in a floor drain and on the legs of a stainless-steel table in the packing room. It had not been found in any product, but for ready-to-eat food it was a serious warning sign.
A few days later, a major export customer that was about to audit the plant learned of the result and suspended its next order until the factory could prove the problem had been fixed. The suspended orders were worth several million baht.
Wipa's team deep-cleaned the packing room with their usual chemicals, but the second round of swabs still found the bacteria at nearby points. She began to realise the problem was not effort but method. The bacteria were hiding in places cloths and brushes could not reach: table joints, the underside of conveyors and upper walls where condensation collected.
Wipa proposed to management that the plant combine a professional disinfection spraying service with improvements to its cleaning procedures before the third round of swabs, which the customer would observe in person. She contacted the World Health Disinfection team.
Surface swabs check whether microbes on food-contact or environmental surfaces exceed limits. When a result fails, find the cause, clean and disinfect, then re-swab to confirm.
Identify failed points, analyse the cause, remove food soil first, disinfect by procedure, re-swab, and record every step with photos.
QA worked with the team to pinpoint failed areas. Production removed food soil per plant procedure, then the crew disinfected production areas, cold rooms, drains and changing points with ULV fine mist and Chemgene HLD4H during line downtime.
QA re-swabbed per the plant plan and attached the crew’s photo report to the corrective-action file. The plant then added regular treatments to its existing cleaning plan.
The plant submitted its corrective documents to the buyer and now has records that make the next audit easier.
Product used on this job:
| Before | After |
|---|---|
| Failed swab | Failed points identified |
| Buyer suspended orders | Cleaned and disinfected by procedure |
| Lots on hold | Confirmation swabs |
| No corrective records | Photo reports |
| Risk spots in machine gaps | Regular treatments |
“In a food plant, cleaning without evidence is as good as not cleaning.”
In the customer’s words
World Health Disinfection offers both services and products, so customers can hire the team on a cycle, buy equipment or disinfectant to use themselves, or combine both, with guidance on safe use.
No, remove soil first, then disinfect.
Work is done during downtime or holidays.
Follow plant procedure on rinsing or wiping after disinfection.
Reports support documentation; auditors decide.
Yes, and beverage plants too.
food factory disinfectionfailed swabproduction line disinfectionGMP cleaningcold room disinfectionfood export plantfood safetyfactory disinfectantdisinfection Samut Sakhonfactory disinfection service
Talk to the team any day. Send photos and details of the problem via LINE @whd268 or call 065-556-6294 for advice and a quotation.
References: World Health Organization (WHO) | Department of Disease Control, Thailand
Related tags: #DisinfectionService #FoodFactoryDisinfection #FoodSafety #GMP #Disinfectant #Chemgene
Keywords: disinfection spraying service,food factory disinfection,Listeria control,production line disinfection Thailand,food safety sanitation service,Chemgene