Last updated: 11 Sep 2026 | 5 Views |
An air-conditioned room that never closes, people breathing hard on cardio machines, and a brand-new floor still releasing chemical vapours: it is one of the toughest post-renovation problems a 24-hour gym can face.
That gym rubber floor smell your contractor says will "be gone in a month" can send members out the door long before it fades. This article walks through a situation many gyms run into after new flooring goes down, explains where rubber, PU adhesive and epoxy odours really come from, why fans and charcoal bags barely help, and why WHD's Paint Odor & Chemical Residue Removal service with the Master Ozone Generator is a fast, measurable way out.
This story is a composite based on situations we commonly see; names and places are fictional.
Pakin, 38, owns PulseLine 24 Fitness in Bangkok's Ram Inthra area. It is a 650-square-metre gym open around the clock, with roughly 1,400 regular members: office workers who drop in after work, night-shift nurses, and university students who like to train at 1 a.m. because the place is quiet.
In early June he invested almost 1.2 million baht to expand the free-weight zone from 120 to 220 square metres. The contractor laid 15 mm rubber tiles bonded with PU adhesive to take the impact of heavy dumbbells and barbells, and poured a dark-grey epoxy floor across another 80 square metres for functional training. The work finished on schedule on 16 June, and the new zone opened the very next morning. A 24-hour gym, after all, has no quiet days to spare.
On day one, the glossy epoxy looked sharp and professional. But the first thing everyone noticed as they walked through the door was the smell: a heavy new-rubber odour mixed with a sharp, thinner-like sting, carried through the room by the air conditioning.
The real problem was the layout. The cardio area, with 30 treadmills and 12 bikes, sat right next to the free-weight zone with no wall in between. When members ran at 9 to 10 km/h, they breathed faster and much deeper. Every lungful they pulled in was the same air rising off the new floor.
On 19 June, Natcha, a member training for a half marathon, had to hit the stop button mid-run. Her chest felt tight and she could not stop coughing. She has had mild asthma for years. That night she messaged the gym on LINE: "I couldn't even run ten minutes without feeling short of breath. The smell is really strong."
By the second week the pattern was obvious. Between 10 p.m. and 2 a.m., when the doors were shut and the air conditioning recirculated the same air, the smell was at its worst. In the afternoons, when sunlight through the glass wall warmed the rubber, it grew even sharper. Two trainers were getting headaches almost every shift, and Mew, the branch manager, kept a pack of painkillers on her desk.
After three weeks, the gym's LINE account had logged 41 complaints. Google Maps reviews started mentioning "chemical smell" and "hard to breathe". Twenty-three annual members asked to cancel or freeze their memberships, and a company that had bought a corporate package for 60 employees said it would "reconsider" before renewing the following month.
Pakin called the contractor. The answer: "All new rubber floors smell like this. Give it 30 to 60 days and it'll fade." When he ran the numbers, two months of lost revenue could come close to half of what the flooring had cost. And worse than the money was the damage to a reputation built on members telling friends, "The air's great there. You can train any time."
Many people treat new-floor odour as a "temporary nuisance". For a business that sells health and a good workout experience, though, gym rubber floor smell hits people's bodies, cash flow, reputation and trust all at once.
During cardio, the volume of air you breathe per minute rises several times over compared with sitting still, and many people switch to mouth breathing. That means the body takes in far more of whatever is floating in the room. Common symptoms in spaces with high VOC levels include:
Beyond short-term symptoms, long-term exposure to certain VOCs is a concern that health agencies take seriously. A workout room full of chemical vapours is not something to simply wait out.
People choose gyms based on reviews and word of mouth. A handful of comments saying "smells like chemicals" is enough to push someone comparing options to go elsewhere, and those reviews stay online long after the smell is gone.
Members start to wonder whether the owner really cares about their health. Trainers who have to smile at clients while nursing a headache begin to lose motivation. That kind of trust takes years to build and only a few weeks to lose.
Most of what you smell after new flooring goes in comes from volatile organic compounds, or VOCs: chemicals that evaporate into the air at room temperature. Measured together, they are reported as TVOC (Total Volatile Organic Compounds). In a gym that installs rubber and epoxy floors at the same time, the odour comes from several layers at once.
Many shock-absorbing gym tiles are made from synthetic rubber granules, often recycled SBR, held together with a polyurethane binder. That familiar "new rubber" smell comes from residues left over from the rubber curing (vulcanisation) process, such as sulphur-containing compounds, accelerators and processing oils in the rubber. They seep out of the tile surface slowly, over a long period.
The polyurethane glue used to bond tiles to the concrete slab can contain solvents in some formulations, and it gives off vapours while it cures. Because it is pinned under 15 mm of rubber, those vapours escape only gradually through the seams between tiles, which is why the smell drags on far longer than most owners expect.
Epoxy flooring is made by mixing a resin with a hardener, often an amine-based compound with a distinctive, pungent smell. Some primer systems also use thinner or other solvents. If the floor is opened for use before it has fully cured, emissions in the first days can be quite strong.
VOCs evaporate faster as temperature rises, which explains the sharper smell on sunny afternoons. At night, with the doors shut and the air conditioning recirculating, vapours simply build up. Worse still, those chemicals get absorbed into porous materials such as bench padding foam, yoga mats, punching bags, gypsum ceiling boards and curtains, then slowly released again. This is called off-gassing, and it is why the smell seems to "never go away" even weeks later.
Before calling in specialists, Pakin tried almost every trick gym owners usually reach for. The results tend to look like this:
With the usual fixes going nowhere, Pakin contacted World Health Disinfection (WHD), which provides a dedicated ozone paint odor and chemical residue removal service using the Master Ozone Generator, built for tackling paint smells and chemical vapours in enclosed spaces.
The machine releases ozone (O₃) into the space, mimicking the way nature purifies air. Ozone is a powerful oxidiser, so it reacts with and breaks the molecular bonds of odour molecules, chemical vapours (VOCs) and germs right at the source. It destroys the smell rather than covering it up the way perfume does.
Once it has reacted, ozone naturally decomposes back into oxygen (O₂), so no chemical residue is left on the rubber, the equipment or the benches members touch. And because ozone is a gas, it reaches corners that cloths and sprays cannot: the seams between tiles, under dumbbell racks, behind machines and up around the ceiling.
What sets WHD apart is on-site TVOC measurement before and after treatment, using an AM1310 meter backed by calibration documents: a KIMO PT100 SC0110 adjusting certificate and a BR-SMART certificate of calibration. WHD is one of the few providers in Thailand that shows TVOC reduction results measured at real job sites, which gives gym owners solid data to share with members and staff.
Ozone treatment must be carried out in a closed, unoccupied space, with no people, pets or plants inside, and it is handled by trained technicians. After the cycle, the ozone is left to decompose and the area is ventilated before anyone goes back in. According to the service page, sites are typically ready to use within about 2 hours. For a 24-hour gym, that means closing a single zone during the quietest overnight window instead of shutting the branch for days.
Ozone reacts directly with odour molecules, so rubber and adhesive smells genuinely decrease instead of returning once the air freshener wears off. Explore the ozone odor removal service.
The service covers epoxy and PU odours, thinner, lacquer and industrial adhesives, which are exactly the main culprits behind a newly floored gym.
Readings from a calibrated AM1310 meter show you how much the chemical vapours dropped on your own site, and give you something transparent to show members.
Ideal for a 24-hour gym that cannot afford long closures. Treat one zone late at night and open as usual the next morning.
Ozone reverts to oxygen on its own, leaving no film or residue on dumbbells, bench pads or the floor where members stretch.
As a gas, ozone spreads through the whole closed space, including tile seams, the undersides of machines and spots that are hard to clean by hand.
This chemical residue removal with ozone works quickly across wide areas, from small rooms to open workout floors and factories, with the cycle calculated for each room's volume.
Beyond chemical smells, ozone also helps deal with musty odours, germs and mould in enclosed spaces, a classic headache in gym locker rooms and equipment stores.
The team surveys the site, assesses materials, moves or covers ozone-sensitive items, and makes sure no one enters the area during treatment.
WHD's work includes condo bedrooms, living rooms, car paint spraying, office meeting rooms and chemical industrial plants. Request an ozone treatment quote for your gym.
| Before | After |
|---|---|
| Rubber and a sharp, thinner-like odour hit you right at the entrance | The smell is noticeably lighter, and members walk in without wrinkling their noses |
| Members stopped treadmills mid-run, short of breath | Runners are back to finishing their usual sessions |
| Trainers had headaches nearly every shift | Staff report feeling more comfortable, with fewer headaches |
| Only opinions, with no data on what was actually in the air | On-site before-and-after TVOC readings to share with members |
| Complaints on LINE growing every day | Odour complaints drop off clearly |
| Air fresheners, charcoal bags and fans cluttering the room, with little effect | Odour-masking clutter cleared away, and the space looks professional again |
Pakin gave members three days' notice that the free-weight and cardio zones would close from 1 a.m. to 5 a.m. on Tuesday night. The WHD team arrived in the evening to survey the site and take TVOC readings, then moved the potted plants out, locked the resistance bands away and covered some of the machine screens as the technicians advised.
On Wednesday morning, Mew was the first to walk in, and she paused for a moment. The sharp smell that had greeted her every morning was clearly lighter. The post-treatment TVOC reading was lower than the one taken before the work began. Pakin posted the results on the gym's LINE account along with an apology, and invited members who had frozen their memberships to come back for a free trial week.
Not everyone returned. But within a month, a number of those members were back, the company with the corporate package decided to renew, and Natcha was running on her usual treadmill again. She told the front desk simply, "I managed the full hour today."
Yes. Ozone treatment is done in a closed, unoccupied space with no people, pets or plants inside, and re-entry is allowed only after the ozone has decomposed and the area has been ventilated.
It depends on the size of the space and how strong the odour is. Sites are typically ready to use within about 2 hours after the cycle ends, and the team will confirm the timeframe after the survey.
Ozone naturally breaks down back into oxygen, so no chemical residue is left behind. The team waits for it to decompose and ventilates the area before handing it back.
Anything from a condo bedroom or meeting room to a gym floor or factory. The team calculates the treatment cycle based on the actual volume of the room.
Not necessarily. If zones can be separated, you can plan to close just the affected area during the quietest overnight hours.
Some materials, such as natural rubber, can be sensitive to ozone. That is why technicians assess the materials first, set an appropriate cycle, and move or cover ozone-sensitive equipment where needed.
An air purifier only filters the air that passes through it. Ozone spreads through the whole room and reacts with odour molecules in every corner, and WHD backs the result with TVOC readings.
Talk to the WHD team about rubber, PU adhesive and epoxy odours in your gym, with before-and-after TVOC readings taken on site.
See the service & get a quote — click here
Call 065-556-6294 · LINE @whd268 · Email worldhealthdisinfection@gmail.com
88/268 Kanlapaphruek Rd., Bang Khae, Bangkok 10160, Thailand
Keywords: gym rubber floor smell, ozone paint odor removal, chemical residue removal, epoxy floor smell, PU adhesive odor, TVOC reduction, gym renovation odor, ozone generator, Master Ozone Generator